11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
PAGE 30
LIQUID SEALANT APPLICATION
Clean all threads with a soft brush and a suitable cleaning solvent.
Dry threads thoroughly with compressed air or shop towel.
Apply the Liquid Sealant (Compound PLS 2), to the external threads of
the Male Connector.
Assemble the fitting and torque it to the prescribed value.
Check for leakage. If leakage exists, remove the fitting and return to
Step # 1.
If fitting is loosened or removed, return to Step # 1.
1.
2.
3.
4.
5.
6.
P/N 260798-02
NOTE: Apply Sealant to NPT threads for cylinder and flow control
valve only!
To Next Page
Loading...
