11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
PAGE 14
SAFETY HOOK MAINTENANCE
GREASE ALL HOLES THE
ROD PASSES THRU
GREASE FRONT SURFACE OF
HOOK WITH AUTOMOTIVE
GREASE
EXTENSION PLATE
PLATFORM
LOOP
PLATFORM
SAFETY
HOOK
EXTENSION
PLATE
SAFETY
HOOK
PLATFORM
PLATFORM
LOOP
(WRONG
POSITION)
BEND IN
THIS
DIRECTION
FIG. 8
CHECK SAFETY HOOK FUNCTION
LOOP ADJUSTMENT
FIG. 9
FIG. 10
1. When the Platform is raised to full “Stowed” position,
listen for an audible snap when Safety Hook engages the
Platform Loop.
2. Visually check if loop is fully engaged with the Safety
Hook as shown in FIG. 9.
1. If the Safety Hook is not seating correctly, LOWER Plat-
form to ground level (Operation Manual M-00-40).
2. Adjust by bending the Platform Loop as shown in FIG. 10.
3. RAISE Platform and check for correct Safety Hook
engagement. Repeat adjustment if required.
CORRECT
POSITION
To Next Page
Loading...
