EasyManua.ls Logo

Maxtec MaxO2 OM-25A - 7 Specifications; Base Unit Specifications; Sensor Specifications

Maxtec MaxO2 OM-25A
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
866.4.Maxtec www.maxtecinc.com8
»
The MAXO
2
®
analyzer may be disinfected using standard topical
disinfectants.
»
The MAXO
2
®
analyzer is not intended for steam, ethylene oxide or
radiation sterilization.
»
Store the MAXO
2
®
analyzer in a temperature similar to its ambient
environment of daily use.
7.0 SPECIFICATIONS
7.1 Base Unit Specications
Measurement Range:................................................0.0-100%
Resolution: ........................................................... 0.1%
Accuracy and Linearity: ................ ±1% of full scale at constant temperature, R.H.
and pressure when calibrated at full scale
Total Accuracy: ..........±3% Actual Oxygen Level over full operating temperature range
Response Time: ............... 90% of nal value in approximately 15 seconds at 23°C
Warm-up Time:................................................. none required
Operating Temperature: ............................... 15°C - 40°C (59°F - 104°F)
Storage Temperature:.................................. -15°C - 50°C (5°F - 122°F)
Atmospheric Pressure: .........................................800-1013 mBars
Humidity: .............................................0-95% (non-condensing)
Power Requirements:......................... 2, AA Alkaline batteries (2 X 1.5 Volts)
Battery Life: ...............................approximately 3000 hours in typical use
Low Battery Indication: .......................... "LOW BAT" icon displayed on LCD
Sensor Type: ................................. Maxtec MAX-250 galvanic fuel cell
Expected Sensor Life: ....... >1,500,000% O
2
Hours, over 2 years in typical applications
Dimensions: ....................3.5"(W) x 5.5"(H) x 1.5"(D) [89mm x 140mm x 38mm]
Weight: ........................................... approximately .92 lbs. (417g)
7.2 Sensor Specications
Type: .............................galvanic fuel sensor (0-100%)
Life: .............................. 2 years in typical applications
Interferent Volume % Dry Interference in O2%
Nitrous Oxide
75% <2%
Carbon Dioxide 10% <2%
Halothane 5% <2%
Enurane 5% <2%
Isourane 5% <2%
Helium 70% <2%
Sevourane 6% <2%
Desurane
15% <2%

Related product manuals