Need help?Do you have a question about the Maxtec MaxO2 Plus and is the answer not in the manual?
General| Type | Oxygen Analyzer |
|---|---|
| Measurement Range | 0-100% |
| Resolution | 0.1% |
| Response Time | <15 seconds |
| Display | LCD |
| Sensor Type | Galvanic fuel cell |
| Battery Type | Alkaline |
| Accuracy | ±1% full scale |
| Operating Temperature (F) | 59 to 104°F |
| Operating Humidity | 0-95% RH (non-condensing) |
| Power Supply | 2 AA batteries |
Outlines Maxtec's warranty terms for the MAXO2+ Analyzer and oxygen sensor, excluding routine maintenance items.
Highlights potentially hazardous situations that could result in death, serious injury, or property damage if not avoided.
Provides cautions regarding potential hazards like minor injury or property damage, and specific actions to avoid.
Guides on performing weekly calibration, including when it's required and the calibration process.
Lists common calibration errors (E02, E03, E04, CAL Err) and provides troubleshooting steps.
Provides detailed instructions for replacing the AA batteries in the MAXO2+ analyzer.
Guides on how to replace the oxygen sensor when indicated by an error code.
To Next Page
