1
866.4.Maxtec www.maxtec.com
1.0 SYSTEM OVERVIEW
1.1 Base Unit Description
The MAXO
2
+ analyzer provides unparalleled performance and reliability due to
an advanced design that includes the following features and operational benefits.
»
Extra-life oxygen sensor of approximately 1,500,000 O2 percent hours (2-year warranty)
»
Durable, compact design that permits comfortable, hand-held operation and easy to clean
»
Operation using only two AA Alkaline batteries (2 x 1.5 Volts) for
approximately 5000 hours of performance with continuous use. For extra extended
long life, two AA Lithium batteries may be used.
»
Oxygen-specific, galvanic sensor that achieves 90% of final value in
approximately 15 seconds at room temperature.
»
Large, easy-to-read, 3 1/2-digit LCD display for readings in the 0-100% range.
»
Simple operation and easy one-key calibration.
»
Self-diagnostic check of analog and microprocessor circuitry.
»
Low battery indication.
»
Calibration reminder timer that alerts the operator, using a calibration icon
on the LCD display, to perform a unit calibration.
CAL
BAT
1.2 Symbol Guide
The following symbols and safety labels are found on the MAXO
2
+:
Warning
On/off Button
Calibration Button
Low Battery
Percent
Meets ETL standards
Do not throw away. Follow local
guidelines for disposal.
Calibration required
%
LOT
SN
Lot code/Batch code
Serial Number
REF
Catalog Number
Manufacturer
Follow instructions for use.
Do Not
To Next Page
Need help?
General
