Why aren't the ice cubes completely formed when my Maxx Ice MIM250 Ice Maker dumps them?
If the ice cubes are not completely formed when being dumped by your Maxx Ice Ice Maker, the sprinkler might be blocked. Clean the sprinkler.
Why is my Maxx Ice MIM250 Ice Maker making noise during operation?
If your Maxx Ice Ice Maker is making noise during operation: * Ensure the feet are leveled and locked. If not, level and lock them. * Certain sounds are normal.
Why does scaling occur frequently inside my Maxx Ice Ice Maker?
If scaling occurs frequently inside your Maxx Ice Ice Maker, it's likely due to the water's hardness being too high. Consider using a water-softening device installed before the water inlet.
What to do if the body of my Maxx Ice Ice Maker is electrified?
If the body of your Maxx Ice Ice Maker is electrified, it indicates that the grounding line isn’t in the socket. Use a socket meeting the required electrical standard.
Specifies the required ambient temperature range for proper operation.
Details water temperature, pressure, and filtration needs for the unit.
Recommends installing a water filter system for optimal performance.
Outlines necessary clearances for proper air circulation around the unit.
Provides guidance on stacking ice machines and disclaims endorsement of air-cooled stacking.
Notes the requirement for a thermostatic bin control kit when used with a dispenser.
Lists routine checks and cleaning tasks for the ice maker.
Detailed steps for cleaning and sanitizing the ice machine to prevent issues.
Explains the components and operation of the refrigeration system.
Describes how water is supplied, distributed, and managed within the ice maker.
Illustrates the electrical connections and circuit diagram of the unit.
Explains unit status modes (electrify, ice-making, harvest, full, cleaning) and LED indications.
Details the function of controller box LEDs, buttons, and their role in operation.
Step-by-step guide for adjusting the size of the ice cubes produced by the machine.
Visual representation of the ice maker's components with numerical labels.
Lists components by item number, code, and English description.
Safety precautions and initial checks before attempting to diagnose problems.
Guidance on using senses like listening, looking, and feeling to identify issues.
A structured approach to diagnosing and resolving ice maker problems.
Steps to diagnose why the ice maker fails to start or operate.
Diagnosing issues when the machine operates but doesn't make ice.
Troubleshooting steps for producing ice that is cloudy or not fully formed.
Addressing issues related to slow ice production or incorrect cube size.
Diagnosing the cause of ice cubes being hollow.
Resolving problems with inconsistent ice bridge thickness.
Troubleshooting variations in ice bridge thickness between cycles.
Diagnosing why the machine does not initiate the ice harvest cycle.
Addressing issues where the machine reverts to ice-making too soon.
Troubleshooting problems with the harvest cycle taking too long.
Diagnosing why the evaporator may become excessively hot.
Resolving problems with the compressor not starting or starting frequently.
Diagnosing why the compressor runs but no ice is made.
Identifying and resolving sources of excessive noise from the unit.
Procedures for replacing the electronic control box, fuses, and temperature sensors.
Step-by-step guide for replacing the water pump assembly.
Instructions for replacing key parts within the refrigeration system.
Procedures for replacing the hot gas valve, drier, and evaporator.
Detailed analysis of the refrigeration system's cycle and components.
Understanding and interpreting refrigerant pressures for diagnosis.
In-depth troubleshooting of compressor performance and potential failures.
Diagnosing issues with capacitors, relays, and overload protection.
Troubleshooting symptoms related to the TXV's function and failure.
Diagnosing problems associated with the hot gas valve during harvest.
Troubleshooting ice formation and release issues related to the evaporator.
Information on refrigerant types, handling, and potential issues.
Diagnosing issues with control board timers, sensors, and indicators.
Detailed steps for adjusting the size of the ice cubes produced.
Explanation of how the bin control shuts off the machine when full.
Instructions for adjusting the bin switch for proper operation.
Comprehensive list of available spare parts with codes and descriptions.
General| Dimensions | 30" x 24" x 36" |
|---|---|
| Weight | 130 lbs |
| Material | Stainless Steel |
| Daily Ice Production | 250 lbs |
| Condenser | Air-Cooled |
| Voltage | 115V |
| Power Supply | 115V/60Hz |
| Ice Type | Cube |
| Width | 30 in |
| Depth | 24 in |
| Production Capacity | 250 lbs per day |
| Ice Production | 250 lbs/day |
To Next Page
