14
FIG 11 Assembling Front Panel
9. Place cords/wires of Front Panel and Back Panel into the sauna room area to avoid
damaging the cords/wires during the roof installation. Open the door, lift the Roof
Panel up and over the sauna room, and gently lower it into place resting it on the
wall panels. (see FIG 12) Make sure that all cords/wires are slipped through the
corresponding holes in the Roof Panel. Proceed in screwing the Roof Panel down.
(see FIG 13)
FIG 12 Installing Roof Cover FIG 13 Slip cords/wires
through corresponding holes
10. Connect all the wires and connectors to the corresponding outlets on the Roof
Panel. Be sure all the plugs are connected snug and tight. (see FIG-14)
To Next Page
Loading...
Need help?
General
