MAYFLASH Wireless Sensor DolphinBar
14
Firmware updates
The Wireless Sensor DolphinBar, as many other hardware peripherals, relies on firmware
updates to keep compatibility with the operating systems it supports, and with the Dolphin
emulator itself. You can check for updates with the MAYFLASH DolphinBar Upgrade
Firmware tool (for Windows XP, and above).
1. Download and run the tool from the MAYFLASH website
(look for downloads labeled as W010):
http://www.mayflash.com/Support/Download/
2. Press and hold the SYNC button on the DolphinBar and connect it to your PC
via USB. Wait until Windows recognizes the new hardware.
3. Release the SYNC button. You’ll find that the Update Firmware button in the
tool is now enabled. Click this button to update.
Do not disconnect the DolphinBar or turn off your PC while it’s updating
the firmware, it may render it unusable.
To Next Page
Loading...