Maytag 27" - Quick Spin Test

7
Test or Display
Press LED to Start Press LED to Cancel
Clear All
Diagnostic
Codes
Press Delay and Chime together while
displaying diagnostic codes
Display
Software
Version
Press Soil Level. Press 2 times for
displays with only 2 character positions.
Press Soil Level a 3
rd
time
Cycle Count
Press Chime
Slide 5
Quick Spin Test
While in Service Mode, press Delay and Rinse&Spin key to
start a Quick Spin Test. Quick Spin test steps are as follows:
• Start spinning and after reaching a maximum spin speed,
stay at maximum spin speed for 2 minutes and stop Quick
Spin Test
Press
Quick Spin Test
Refer to Technical Data Sheet for Detailed Instructions
Quick Spin Test
While in Service Mode, press Delay and Rinse&Spin keys to start a Quick Spin Test.
Quick Spin test steps are as follows:
• Start spinning and after reaching a maximum spin speed.
• stay at maximum spin speed for 2 minutes and stop Quick Spin Test.