EasyManuals Logo

Maytag MDB4949SDE User Manual

Maytag MDB4949SDE
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
Attach the water supply line (copper tubing or flexible braided line)
to the hot water line using a connection configuration that is in
compliance with local codes and ordinances. The water supply to
the dishwasher should have a manual shutoff valve located under
the sink.
Slowly route water supply line through hole in cabinet. (If you are
using copper tubing, it will bend and kink easily, so be gentle.) It
should be far enough into the cabinet opening to connect it to the
dishwasher inlet on the front left side of the dishwasher.
Slowly turn water shutoff valve to “ON” position. Flush water into
a shallow pan until clear to get rid of particles that could clog the
inlet valve. Turn shutoff valve to “OFF” position.
Route water line and tape it to the floor in area shown. This will
keep it from moving when dishwasher is moved into cabinet
opening.
Install Drain Hose
IMPORTANT: Always use a new drain hose. Check local codes to
determine whether an air gap is required.
If needed, drill a 1¹⁄₂" (3.8 cm) diameter hole in cabinet wall or side
of the opening closest to the sink.
Route drain hose as shown through hole in cabinet to the front
center of opening where drain connection will be made. Tape
drain hose to the floor in area shown. This will prohibit it from
moving when dishwasher is moved into cabinet opening.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Maytag MDB4949SDE and is the answer not in the manual?

Maytag MDB4949SDE Specifications

General IconGeneral
Stylebuilt-in dishwashers
Colorblack
Load Capacity14
Number of Cycles5
Cycle Selectionspowerblast, auto, normal, quick, rinse
Options/Settingsheated dry, hi temp wash, sani rinse®, control lock, 1-24 hour delay
Drying Typeheated drying
Noise level50 decibels adjusted
Control Typeelectronic
Delay Startyes
Child Lockyes
Load Sensoryes
Number of Racks2
Cycle Signalyes
Water Filteryes
Water Softenerno
Food Disposeryes
Sanitize Settingsno
Annual Energy Consumption270 kilowatt hours
Voltage120 volts
Current15 amperes
Weight and Dimensions IconWeight and Dimensions
Depth25.25 inches
Height33.5 inches
Width23.9 inches
Net Weight89.1 pounds

Related product manuals