516532 B PUBLICATION DATE 1 JUN 2007.DOC PROGRAMMING MANUAL 35
8. TROUBLESHOOTING
8.1. DISPLAY MESSAGES
Various messages may appear on the display at the start, during or at the end of a washing cycle.
When an error occurs the machine will automatically go over to a safe state. With the
diagnostic program you can determine the problem. This program will test the individual functions
of the washing machine one by one.
8.2. FAULT MESSAGES
If a failure occurs the computer will display a diagnostic error message.
The program number and step at which the interruption has occurred are displayed.
The fault message itself contains a number and a corresponding text label by which it’s easy to
find the related information in the manual.
If UNLOAD is displayed, the door can be opened.
XX : the program number
YY : the program step number
UNLOAD : you can open the door if UNLOAD is displayed
D ZZZ : the number of the occurred Diagnostic or Help message
Fault Message : the text label of the Diagnostic message
UNLOAD
Out Of Order (Pr XX St YY)
Ask For Service
(D ZZZ : Fault Message)
To Next Page
Loading...
