Maytag MFS50 - The Structure of a Wash Program

6 PROGRAMMING MANUAL 516532 B PUBLICATION DATE 1 JUN 2007.DOC
3.3. THE STRUCTURE OF A WASH PROGRAM
 a Wash Program is built up step by step.
 each step always consists of a Wash/Rinse sequence and a Drain/Spin sequence.
T Programmable Functions Wash/Rinse sequence :
The available functions are :
 Temperature
 Water Level
 Supplies (bulk dispensing)
 Prewash Time
 Wash Time
 Rinse Time
T Programmable Functions Drain/Spin sequence :
The available functions are :
 RPM (Final Spin)
 Sequence Time
ATTENTION
!!!
A MORE DETAILED EXPLANATION FOR THE SPECIFIC SEQUENCES CAN BE FOUND IN CHAPTER 5.
T The Tumble sequence :
 The wash cycle will always end with the Tumble sequence.
 The tumble sequence takes 30 Seconds, when the program is finished and the door can be opened.
 The Tumble sequence cannot be changed.
!