Maytag MMV5207BC User Manual (English)

Questions and Answers:

D
Deanna GriffithAug 7, 2025
What to do if my Maytag MMV5207BC doesn't work and the fuse is blown?
- T
  trogersAug 8, 2025
  If your Maytag Microwave Oven isn't working and the fuse has blown, the issue might stem from several causes. Begin by inspecting for open or loose wire harnesses. Additionally, examine the primary latch switch, monitor switch, high voltage capacitor, and high voltage transformer for any defects. Make sure to check the adjustment of the primary, interlock monitor, and door sensing switches and check the power relay.
K
Katie KelleyAug 13, 2025
What to do if Maytag Microwave Oven output is low and takes a long time to cook food?
- M
  Michael WhitakerAug 13, 2025
  If your Maytag Microwave Oven is cooking slowly, it could be due to a few reasons. First, check for fluctuations in your home's voltage. Also, check for loose connections in the high voltage circuit, specifically the magnetron filament circuit. Finally, the magnetron itself might be aging and need to be checked or replaced.
S
Sandra RichardsAug 20, 2025
How to fix Maytag Microwave Oven that does not accept key input (touch pad input)?
- A
  Amber NguyenAug 20, 2025
  If your Maytag Microwave Oven isn't responding to key inputs on the touch pad, here's what you can check. Ensure the key input is in the correct sequence as per the operation instructions. Inspect for any open or loose connections between the keypad and the PCB assembly. Also, look for shorted or open keypads, or a defective PCB assembly. Check the connection between the keypad and PCB assembly, replace the keypad membrane, or replace the PCB assembly.
Q
qperezAug 26, 2025
What to do if Maytag Microwave Oven lamp and fan motor activate?
- K
  Kyle ThomasAug 26, 2025
  If the lamp and fan motor in your Maytag Microwave Oven are activating, it could be due to a misadjusted or loose primary latch switch, or a defective primary latch switch. Try adjusting the door and latch switches, or consider replacing all the latch/door switches.
R
Richard BradleyAug 31, 2025
Why my Maytag MMV5207BC does not work, no display, fuse is OK?
- K
  Kathy DavisAug 31, 2025
  If your Maytag Microwave Oven isn't working, there's no display, and the fuse is okay, it could be due to an open or loose wire harness, an open thermal (magnetron) cutout, an open low voltage transformer, or a defective PCB assembly. If the thermal (magnetron) cutout is defective, check the fan motor. If the low voltage transformer is defective, check the PCB assembly.