What to do if motor is not working in Maytronics MBC8-UNI Swimming Pool Vacuum?
If the motor in your Maytronics Swimming Pool Vacuum isn't working, first check if the impeller or the drive system is blocked. If the power source is in order, please contact your robot pool cleaner distributor.
What to do if my Maytronics MBC8-UNI is moving in circles?
If your Maytronics Swimming Pool Vacuum is moving in circles or not reaching all pool areas, try the following: 1. Check for any foreign objects in the moving parts. 2. Ensure that the filter elements are clean and that the filter doors are closed. 3. Make sure enough cable is laid out to cover the entire pool. 4. If you're using the robot pool cleaner at the beginning of the season, brush any algae from the floor and walls of the pool before use.
How to fix Maytronics Swimming Pool Vacuum not sinking?
If your Maytronics Swimming Pool Vacuum is not sinking, make sure the Wonder brushes or the combined brushes are soaked in water.
General| Pool Type | In-ground |
|---|---|
| Remote | No |
| Type | Robotic |
| Cable Length | 20 m |
| Power Supply | 24 V DC |
| Warranty | 2 years |
To Next Page