▼
Anchor Bracket
Anchor brackets for securing
child-restraint systems are equipped in the
vehicle. Locate each anchor position using
the illustration.
To install a child-restraint system, remove
the head restraint. Always follow the
instruction manual accompanying the
child-restraint system.
Anchor bracket location
Use the indicated anchor bracket locations
when installing a child-restraint system
equipped with a tether.
Anchor bracket
For right
For left
For center
(4-Door)
(5-Door)
For left
For center
For right
Some models.
WARNING
Always attach the tether strap to the
correct tether anchor position:
Attaching the tether strap to the incorrect
tether anchor position is dangerous. In a
collision, the tether strap could come
o
and loosen the child-restraint system. If the
child-restraint system moves it could result
in death or injury to the child.
Always remove the head restraint and set
the tether strap:
Routing the tether strap on top of the head
restraint is dangerous. In a collision the tether
strap could slide o the head restraint and
loosen the child-restraint system. The
child-restraint system could move which may
result in death or injury to the child.
Anchor bracket
Tether strap
(4-Door)
Anchor bracket
Tether strap
Essential Safety Equipment
Child-Restraint
2-32
Mazda3_8GE4-EA-17F_Edition1 2017-4-7 11:59:21
To Next Page
Loading...
