22
1. Reinstall parts in the reverse order of the installation procedure in【PARTS REMOVAL】.
2. Refer to “Required servicing after disconnecting/connecting negative battery cable” in the vehicle workshop
manual or the owner’s manual to restore the vehicle functions.
3. Perform reinstallation and inspection of the vehicle parts.
■ Is available when the ignition is switched ON.
■ The sensor detects obstructions when the shift lever is in the R position.
・ Alarm (beeper) sound
■ The beeper operates (sounds) as follows while the system is operating.
9．OPERATION CHEC
To Next Page
