3. Installation of accessory, operation check
Inspection Parts
Inspection Items
Inspection Check
Parking sensor, rear
Operation check
Is the detection status of each sensor that of no
obstruction detected when the ignition is switched ON
and the shift lever is shifted to the R (reverse) position?
Parking sensor, rear
Operation check
Is the detection status of each sensor that of obstruction
detected when the ignition is switched ON and the shift
lever is shifted to the R (reverse) position?
Ground Torque check Is the ground tightened to the specified torque?
・
Distance from corner and buzzer intervals
Distance
Forward, stop At R position
Approx.2-1.5 ft (23.62-17.71 in)
No sound Beep-Beep Intermittent sound
Approx.1.5-1 ft (17.71-11.81 in)
No sound Beep-Beep-Beep Fast intermittent sound
Approx.1 ft (11.81 in)
No sound Beep Continuous sound
※1：Detection area is distance from sensor
To Previous Page
