Mazda Mazda5 - Page 166

Black plate (166,1)
CAUTION
l
The DSC may not operate correctly
unless the following are observed:
l
Use tyres of the correct size
specified for your Mazda on all
four wheels.
l
Use tyres of the same
manufacturer, brand and tread
pattern on all four wheels.
l
Do not mix worn tyres.
l
The DSC may not operate correctly
when tyre chains are used or a
temporary spare tyre is installed
because the tyre diameter changes.
NOTE
After switching the ignition ON, a
clicking sound may be heard behind the
instrument panel. This sound is the
result of the DSC system self-check
operation and does not indicate an
abnormality.
qTCS/DSC Indicator Light
This indicator light stays on for a few
seconds when the ignition is switch ed
ON. If the TCS or DSC is operating, the
indicator light flashes.
If the light stays on, the TCS or DSC may
have a malfunction and they may not
operate correctly. Take your vehicle to an
expert repairer, we recommend an
Authorised Mazda Repairer.
qDSC OFF Indicator Light
This indicator light stays on for a few
seconds when the ignition is switch ed
ON.
It also illuminates when the DSC OFF
switch is pressed and TCS/DSC is
switched off (page 5-36).
If the light stays on when the TCS/DSC is
not switched off, take your vehicle to an
expert repairer, we recommend an
Authorised Mazda Repairer. The dynamic
stability control may have a malfunction.
qDSC OFF Switch
Press the DSC OFF switch to turn off the
TCS/DSC. The DSC OFF indicator light
illuminates.
5-36
Driving Your Mazda
Starting and Driving
Mazda5_8DF6-EI-13J_Edition7 Page166
Thursday, March 9 2017 8:34 PM
Form No.8DF6-EI-13J