Black plate (256,1)
qClock
The time is displayed when the ignition is
switched to ACC or ON.
Time setting
1. Switch the ignition ACC or ON.
2. Adjust the time using the time setting
buttons (
, ).
The hours advance while the time
setting button (
) is pressed.
The minutes advance while the time
setting button (
) is pressed.
Time resetting
1. Switch the ignition ACC or ON.
2. Press the :00 button.
3. When the button is pressed, the time
will be reset as follows:
(Example)
12:01―12:29→12:00
12:30―12:59→1:00
NOTE
When the :00 button is pressed, the
seconds will start at “00”.
qAmbient Temperature Display
With fully automatic type air
conditioner
(Without rear ventilation system)
When the ignition is switched ON, the
ambient temperature is displayed.
The ambi ent temperature display switches
on or off by pressing the AMB button.
(With rear ventilation system)
The ambi ent temperature is displayed
when the ignition is switched ON.
Without fully automatic type air
conditioner
The ambi ent temperature is displayed
when the ignition is switched ON.
6-62
Interior Comfort
Interior Equipment
Mazda5_8DF6-EI-13J_Edition7 Page256
Thursday, March 9 2017 8:35 PM
Form No.8DF6-EI-13J
To Next Page
Loading...
