(1) Specifications
Model: 307A / 407A
Paper sizes: 3.5” x 5.0” to 11” x 17”
3.5” X 5.0” size is for SINGLE fold only.
5” x 7.2” size cannot be folded into GATE.
Paper weight: 45 to 105g/m
2
(up to 152g/m
2
for single fold) 14 to 70 lb
Paper quality: Medium and high-quality paper, high-quality paper for stencil printing.
Fold types: Single, gate, letter, zigzag, double parallel, and fold-out. Irregular folding and
cross folding using double fold.
Fold dimensions: Maximum fold dimensions
Table 1: 12.6” (zigzag, double parallel, and fold-out)
Table 2: 8.5” (single, gate, and letter)
Minimum fold dimensions
Table 1: 2.0” (gate and letter)
Table 2: 1.6” (single, zigzag, double parallel, and fold-out)
Paper feed system: Three-roller friction feed system
Maximum capacity: 500 sheets (20 lb bond)
Folding speed: 3700 to 11520 sheets per hour (single fold using letter size paper)
Control system: Automatic setting by built-in microcomputer
Additional functions: Skew correction device
Paper jam detector
Four-digit counter with addition/subtraction modes
Automatic paper size detector (letter, legal & ledger sizes)
Memory function : 6 kinds
Auxiliary paper guide for cross fold
Perforating Option
Noise 80dB
Power consumption: 75W, 0.7A
Power source: 120 VAC/60Hz
Dimensions: 34.25” × 20.9” × 20.5” (during use)
26” × 20.9” × 20.5” (during storage)
Net weight: 74 lb Shipping Weight: 86 lb
Options: Perforator table assembly with a 2 mm or 4 mm perforation cutter
Scoring table assembly
Manual feed tray
4
http://www.monomachines.com/
http://www.monomachines.com/
To Next Page
Loading...
