Need help?Do you have a question about the MBM 307A and is the answer not in the manual?
General| Brand | MBM |
|---|---|
| Model | 307A |
| Category | Booklet makers |
| Language | English |
Explains the meaning of danger symbols and notes used in the manual.
Lists critical safety warnings to prevent electrical shock and fire hazards.
Provides warnings for potential injuries or property damage during operation.
How the counter increments with each folded sheet.
How the counter decrements with each folded sheet.
Step-by-step guide for folding standard-sized paper.
How to select one of the six available fold types.
Procedure for performing test folds to check alignment.
Instructions for continuous operation and stopping the machine.
Guide for folding paper sizes not covered by standard settings.
How to measure and input paper length for non-standard sizes.
Adjusting the paper eject roller position for the 407A model.
Using +/- keys to set positions for tables and rollers.
Adjusting the paper eject roller position for the 307A model.
Explanation of cross folding and its applications.
Detailed steps and notes for performing cross folds.
Adjusting the feed angle to correct slanted folding.
Overview of fine adjustment using stopper knobs and +/- keys.
Details fine adjustment procedures for Table 1 based on fold type.
Details fine adjustment procedures for Table 2 based on fold type.
How to input and save non-standard fold settings.
Procedure to cancel specific stored fold settings.
Procedure to cancel all stored fold settings.
Details the procedure for removing and setting rollers without tools.
Instructions for cleaning the paper feed photo sensor with a cotton swab.
Procedure for replacing paper feed roller and paper separator.
Indicates issues like no paper or dirty sensor.
Indicates issues like paper jam at fold tables or disconnected plug.
Indicates issues like paper jam or dirty sensor at paper eject.
To Next Page
