MBW F36/4 - Page 20

- 17 -
ITEM PART NO. DESCRIPTION F36 F46
1. 01243 SEAL, GEAR SHAFT 1 1
2. 01244 RETAINING RING, EXTERNAL 1 1
3. 01251 BEARING TAPER ROLLER (Includes Bearing & Cup) 2 2
4. 01252 BEARING TAPER ROLLER (Includes Bearing & Cup) 2 2
5. 01254 KEY, 5/16 SQUARE x 2 lg. 1 1
6. 01256 O-RING 1 1
7. 01279 RETAINING RING, EXTERNAL 2 2
8. 05323 HOUSING, GEARBOX 1 1
9. 05326 COVER, GEARBOX 1 1
10. 05327 CAP, BEARING 1 1
11. 05329 ARM, YOKE 1 1
12. 05359 SHIM GASKET, 0.004”
05360 SHIM GASKET, 0.010”
13. 05361 SHIM GASKET, 0.004”
05401 SHIM GASKET, 0.010”
14. 05396 ROD, PIVOT 1 1
15. 05515 WORM SHAFT 1 1
16. 05518 SPACER 1 1
17. 05521 GEAR, WORM 1 1
18. 05523 SHAFT, OUTPUT 1 1
19. 05524 KEY, 5/16” SQUARE x 1-11/16” LONG 1 1
20. 05532 CAP, BEARING 1 1
21. 05533 SEAL, INPUT SHAFT 1 1
22. 06037 VALVE, RELIEF 1 1
23. 06264 RETAINING RING 1 1
24. 06392 O-RING 2 2
25. 21009 HI-LOW SCREW, 1/4 X 3/4, TORX 1
26. 21585 CABLE SLIDE, TROWEL HANDLE 1
27. 21586 TUBE MOUNT, F36 1
21588 TUBE MOUNT, F46 1
28. 21590 HANDLE SPACER, F46 1
29. F042007FWS FLANGE BOLT, 1/4-20 x 7/8” 8 8
30. F051807FWS FLANGE BOLT, 5/16-18 x 7/8” 2 2
31. F051808FSS FLAT HEAD SCREW, 5/16-18 x 1” 2 2
32. F0618SHPP PIPE PLUG, 3/8” 1 1
33. F061622HCS HEX HEAD CAP SCREW, 3/8-16 X 2-3/4 LG., GR8 2 2
34. F0616ELN LOCK NUT, 3/8-16, NYLOC, ZP 2 2
35. F06SW FLAT WASHER, 3/8 ZP. 4 4
REPLACEMENT KITS
05470 KIT, GASKET & SEAL (includes 1, 12, 13, 21 & 23)
05546 GEARBOX ASSEMBLY (includes all above items)
05700 GEAR OIL, CHEVRON #680