MBW F36/4 - (Standard & EZ Pitch Handle); Stopping Engine

- 6 -
2. Move handle bar to desired height.
3. Rotate handle height adjustment lever (16) clockwise
to re-tighten.
4. If lever (21) is not parallel to handle bar when tight,
pull out on lever and rotate lever and release lever
when up against handle bar.
(Standard & EZ Pitch Handle)
1. Loosen handle height adjustment lever. If lever is
tight to handle bar, pull out on lever and rotate away
from handle bar and release lever.
2. Move handle bar to desired height.
3. Retighten handle height adjustment lever.
Stopping Engine
1. Move throttle to idle position.
2. Turn trowel safety switch to “OFF”.
3. Close the fuel valve.
WARNING
Always stop the engine before:
Adding fuel.
Leaving the equipment unattended for any
amount of time.
Before making any repairs or adjustments to the
machine.