MC Electronics MCK 800 - 4 Accessories

To Next Page

To Previous Page

User’s manual

SEEDER MONITOR MCK 800

4. Accessories

Table 4-1. Accessories

CODE DESCRIPTION

481

Speed sensor with support - cable L=2000 mm

4228

Standard photocell sensor

10FOT-4RSTES / 10FOT-

4RSTIN

Photocell sensor for seed-drop pipe

10FOT-SEMIMINUTI-0001

Photocell sensor for small seeds

CAB-SEM-001

Cable 4 rows x 80 cm

CAB-SEM-002

Cable 6 rows x 80 cm

CAB-SEM-003

Cable 8 rows x 80 cm

NOTE: cables must be ordered according to the type of seed drill used; the following

data are required while ordering: rows number, sowing distance between rows, seed

drill brand and model.

All components of the Kit - SEEDER MONITOR MCK 800 are standard, therefore

they can be used on all models of seed drills; only the supports for the photocells are

specific for the mark and model of the seed drill used