McAfee Data Loss Prevention Prevent - Post-Setup Tasks

The McAfee DLP appliance is installed and registered to McAfee ePO.
9 Post-setup tasks
For more information on these tasks, see the product guide.
McAfee DLP appliances
1
Congure an evidence server to store the les that trigger a rule.
2
Congure one or more syslog servers if required.
3
Enable relevant predened policies and rules.
4
Create additional classications, policies, and rules to detect potential data loss incidents.
5
Conrm that incidents are recorded in the DLP Incident Manager.
McAfee DLP Prevent appliances
For McAfee DLP Prevent appliances that analyze email trac:
1
Verify connectivity and mail
ow between the mail transfer agent (MTA) server and the McAfee DLP
Prevent appliance.
2
Conrm that the X-RCIS-Action: Allow header is added to received email.
For McAfee DLP Prevent appliances that analyze web trac, verify connectivity between the web proxy server
and the appliance.
McAfee DLP Monitor appliances
• Generate some trac that the congured network tap or SPAN can see.
6