WEARER: How to recharge the watch
mcarewatch.com.au
7
1. Connect the magnetic recharge
base to the USB cable and power
adaptor
2. Four recharge pins on the bottom
of the watch need to connect with
the 4 pins on the magnetic recharge
base
3. Place watch on top of the magnetic
recharge base as shown (with 4 pins on
watch connecting to the 4 pins on
charger)
IMPORTANT: WHEN WATCH REACHES 15% BATTERY LEVEL, PLEASE RECHARGE AS WATCH GOES
INTO POWER SAVING MODE AND MONITORING MAY NOT OPERATE AS REQUIRED
To Next Page
Loading...
