McCulloch MT780 - Specifications

22
SPECIFICATIONS
ENGINE*
DRIVE SHAFT & CUTTING ATTACHMENT*
*All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.
Engine Type.......................................................................................................................................... Air-Cooled, 2-Cycle
Stroke.................................................................................................................................................... 1.25 in. (31.75 mm)
Displacement............................................................................................................................................. 1.9 cu in. (31 cc)
Clutch Type ......................................................................................................................................................... Centrifugal
Idle Speed RPM ...................................................................................................................................... 2,800 - 4,000 rpm
Operating RPM.................................................................................................................................................. 7,800+ rpm
Ignition Type.......................................................................................................................................................... Electronic
Ignition Switch.............................................................................................................................................. Rocker Switch
Spark Plug Gap....................................................................................................................................... 0.020 in. (0.5 mm)
Lubrication................................................................................................................................................... Fuel/Oil Mixture
Fuel/Oil Ratio.................................................................................................................................................................. 40:1
Carburetor....................................................................................................................................... Diaphragm, All-Position
Starter............................................................................................................................. Auto Rewind (EZ-Pull Version 3™)
Muffler..................................................................................................................................................... Baffled with Guard
Throttle............................................................................................................................................... Manual Spring Return
Fuel Tank Capacity.................................................................................................................................... 15 fl.oz. (444 ml)
Drive Shaft Housing ............................................................................................................................................ Steel Tube
Throttle Control................................................................................................................. Finger-Tip Trigger with Lock-Out
Approximate Unit Weight (No fuel, with J-handle, cutting attachment and shield) ................................. 14.75 lbs. (6.5 kg)
Cutting Mechanism................................................................................. 4-Tooth Cutting Blade, Dual String Cutting Head
Line Spool............................................................................................................................................. Bump Line Releaser
Line Spool Diameter............................................................................................................................. 4 inches (101.6 mm)
Trimming Line Diameter...................................................................................................................... 0.095 inch (2.41 mm)
Cutting Path Diameter, Cutting Attachment ......................................................................................... 18 inches (45.7 cm)
Cutting Path Diameter, Cutting Blade..................................................................................................... 8 inches (204 mm)
Shoulder Harness ................................................................................................................................... Single Quick-Snap