1.9 Keypad
The keypad on the product lets the operator navigate in
the menu. To access the keypad, push the STOP button
and open the hatch.
• The indicator lamp (A) on the keypad is an
important status indicator. Refer to
The indicator
lamp on page 26
.
• The ON/OFF button (B) is used to turn the product
ON/OFF.
• The Settings button (C) is used to go to the main
menu.
• The Home button (D) is used to choose the park
modes:
Home & Stay
and
Home & Wait
.
• The Start button (E) is used to start the operation
of the product.
• The BACK button (F) is used when moving back
up in the menu lists.
• The OK button (G) is used to confirm the chosen
settings in the menus.
• The arrow keys (H) are used to navigate in the
menu. The up/down arrow keys are also used to
enter digits, for example, PIN code, time and date
• The Schedule button (I) is used to go to the
schedule menu.
• The STAR button (J) is used to choose operating
modes:
Secondary area
,
Power Cut
and
Spot Cut
.
To Next Page
Loading...
