Page UMC2
The Quick Start Tour: The 6060 Plug-in
Start the DAW host and instantiate the 6060 plug-in
• Launch the DAW host and open a session.
• Verify the Display-> Mix Window Shows->Inserts View option is checked.
• In one of the inserts of a stereo master fader, select the 6060 plug-in. Note
the 6060 plug-ins will operate on master or regular audio tracks in mono or
stereo versions.
• If the insert selection does not show the 6060 plug-in, verify that the 6060
plug-in has been installed correctly.
• For more information on starting your DAW host and working with plug-ins,
see the Reference Guide provided by your preferred DAW.
To Next Page
Loading...
Need help?
General