Page UMC10
General Information
To adjust any of the 6060 controls the user can:
• Hold the <Command> key while dragging the slider for fine control, or
• Click on the text box to highlight and edit the numeric value to get precise
control (if a value outside the valid range is input, the control will default to
the nearest allowed value when enter is hit) and hit <Enter>, or
• Click on the text box to highlight the numeric value and then use the arrow
keys to increase or decrease the numeric value, or
• Use the <Option> key to bring all the controls to their default values, or
• Use hardware controller surfaces supported by your DAW host such as the
Avid S6, Mackie HUI, Digidesign’s ICON™, ProControl™ and Control 24.
Control Linking
There is no control linking available in the 6060 at this time.
Automation
All 6060 controls are completely automatable. See your DAW User Manual for
automating plug-ins section.
Presets: Using the Presets and Making Your Own
The 6060 preset library demonstrates the wide range of applications the 6060
can be used. No preset will suit every application, and they have been provided
as a guide for the user, and will hopefully inspire new ideas and ways to use this
sophisticated plug-in.
Refer to your DAW User Manual for accessing and saving plug-in presets.
To Next Page
Loading...
Need help?
General