Page 11@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD###D#!!D$%E%6Item 64857
FG@;HIJK;LGHMJNOGMNH;NGNP; MNFHGQQGHMJN
@'8,-/*T2**F)1)'+=1-V*G'-*F,44<V*F/),4
!
"
" #
$%%%
&
&
@
&
A%
U/(9-'4)'+= @,=9)'+=
A Vibration Pads For noise and vibration reduction
B Anchor Bolts Secures air compressor in place
C Ball Valve Isolates sections of system for maintenance
D Isolation Hose For vibration reduction
E Main Air Line - 3/4″ minimum recommended Distributes air to branch lines
F Ball Valve To drain moisture from system
G Branch Air Line -1/2″ minimum recommended Brings air to point of use
H Air Hose Connects air to tool
I Filter Prevents dirt and condensation from damaging tool or workpiece
J Regulator Adjusts air pressure to tool
K Lubricator (optional) For air tool lubrication
L Coupler and Plug Provides quick connection and release
M Leader Hose (optional) Increases coupler life
N Air Cleaner / Dryer (optional) Prevents water vapor from damaging workpiece
O Air Adjusting Valve (optional) For fine tuning airflow at tool
To Next Page
Loading...
