Page 9@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CD###D#!!D$%E%6Item 64857
FG@;HIJK;LGHMJNOGMNH;NGNP; MNFHGQQGHMJN
T-/1X'=8*'=*)3/*P+:4-/((+-
1� Turn the Power Switch OFF and unplug Power Cord�
2� Fully open Drain Valve�
3� Plug in the Power Cord�
4� Turn the Power Switch ON�
5� Let the unit run for 30 minutes�
Air will expel freely through the Drain Valve�
6� Turn the Power Switch OFF�
7� Unplug the Power Cord and close Drain Valve�
G'-*P+==/9)'+=*F/),4
1� Connect a regulator valve, an inline shut off valve
and a 1/4″ NPT air hose to the Quick Coupler
(all sold separately)� The air hose must be long
enough to reach the work area with enough extra
length to allow free movement while working�
N+)/2 G=*'=D<'=/*(3,)+77*01<<*W1<W/*'(*1=*':4+-)1=)*
(17/)V*>/W'9/*0/91,(/*')*9+=)-+<(*)3/*1'-*(,44<V*/W/=*
'7*)3/*1'-*3+(/*'(*-,4),-/>6**H3/*(3,)+77*W1<W/*(3+,<>*
0/*1*01<<*W1<W/*0/91,(/*')*91=*0/*9<+(/>*A,'9X<V6
2� Depending on the tool that will be used
with this compressor, incorporate additional
components, such as an in-line oiler, a filter,
or a dryer (all sold separately), as shown on
Figure A on page 10 and Figure B on page 11�
Consult air tool’s manual for needed accessories�
To Next Page
Loading...
