EasyManua.ls Logo

McGREGOR MCR2433 - Isolator Key Safety; Battery Safety

McGREGOR MCR2433
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important - Please read these instructions fully before starting assembly
11
Customer Helpline 0345 605 2063
• Remove the isolator key;
-Whenever you leave the machine,
-Before clearing a blockage,
-Before checking, cleaning or working on the machine,
-After striking a foreign object. Inspect the machine for
damage and make repairs as necessary,
-If the machine starts to vibrate abnormally (and check
immediately).
• Ensure the switch is in the ‘off position and the Key
removed before inserting the battery pack. Inserting the
battery pack into a machine while the key is inserted
could result in an accident.
• Keep the battery charger away from rain or Moisture.
Water penetration inside the battery charger increases
the risk of an electric shock. Store in a dry environment.
• Recharge only with the charger specied by the
Manufacturer. A charger that is suitable for one type of
battery pack may create a risk of re when used with
another battery pack.
• Do not charge other batteries with this charger. This is
could cause re or an explosion.
• Keep the battery charger clean. Contamination can
Lead to danger of an electric shock.
• Before each use, check the battery charger, Cable and
plug. If damage is detected, do not Use the battery
charger. Never open the battery Charger yourself.
Isolator Key Safety
Battery Safety
Safety Information

Related product manuals