Personal Safety
Safety Information
• Always check the mower for signs of damage before
each usage.
• Always disconnect the isolator key from the electrical
supply before carrying out any inspection, servicing or
maintenance work.
• Ensure that all the guards are securely tted and in
good working order.
• Check the grass collector bag at regular intervals for
signs of wear and to ensure that it is always in perfect
working order.
• Before each use, inspect the mower to check the
cutting blade, fastening bolts and the entire cutting unit
for any signs of wear or damage. To prevent imbalance
or vibration, worn or damaged cutting blades and
fastening bolts must always be replaced in full.
• Damaged parts on the mower must be replaced by
Electrical Safety (continued)
than 30mA.
• The voltage indicated on the rating plate must
correspond to the voltage of the power source.
• Only use or replace power supply cables for this
unit which correspond to the types indicated by the
manufacturer. See the operating instructions for the
order no. and types.
• Never touch the mains plug with wet hands.
• Do not run over, crush or pull the power supply cable or
extension lead, otherwise it may be damaged. Protect
the cable from heat, oil and sharp edges.
To Next Page
Loading...
