Safety Information
• Never operate the machine with defective guards or
shields, or without safety in place.
• Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
• Before use check the controls and correct operation of
the product.
• Before using the product or after any impact, check for
signs of wear or damage and repair as necessary.
• Always disconnect the product from the power supply
(i.e. remove the plug from the power supply or the
battery pack)
– Whenever leaving the product unattended;
– Before clearing a blockage;
– Before checking, cleaning or working on the product
– After striking a foreign object;
– Whenever the product starts vibrating abnormally.
• Always ensure that the air vents are kept clear of debris.
• Never use replacement parts or accessories not
provided or compatible.
• Warning! The cutting blade may continue to move after
the product is switched off.
• Always be sure of your footing on slopes.
• Walk, never run.
• Mow across the face of slopes, never up and down.
• Exercise extreme caution when changing direction on
slopes.
• Do not mow excessively steep slopes.
Operating and Maintenance Safety (continued)
To Next Page
Loading...
