27
Packing Instructions
Quantity Part Number Description
1 033838 Shipping carton only
4 033837 Foam End Caps
1 033836 Inside carton only
1 033725 Foam Pad
1 034149 Bottom pad
4 018578 Plastic foot
4 100159 #10-32 x 3/4 Machine screws
4 104083 #10-7/16 Flat washers
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four plastic feet are at-
tached to the bottom of the equipment. This will ensure the
proper equipment location on the bottom pad. Failure to do
this will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
To Next Page
Loading...
