19
Packing Instructions
Packing Instructions
Quantity Part Number Description
1 034529 Shipping carton
1 034526 Foam Pad Top
2 034527 Foam Pad Bottom
1 034528 Foam Insert (for protecting
the Tubes during shipping)
1 041314 Warning Sheet
4 400131 10-32 x 1/2 inch screw
4 163073 Feet
In the event it is necessary to repack the equipment
for shipment, the equipment must be packed exactly
as shown below. It is very important that the four feet
are attached to the bottom of the equipment. This will
ensure the proper equipment location on the bottom
foam pad. Failure to do this will result in shipping
damage.
To protect the tubes during shippment, the Foam
Insert removed from the MC275 needs to be re-insert-
ed. Follow the unpacking instructions on pages 4-5 in
the reverse order.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
a shipping carton or any of the interior part(s) are
needed, please call or write Customer Service Depart-
ment of McIntosh Laboratory, refer to page 3. Please
see the Part List for the correct part numbers.
To Next Page
Loading...
Need help?
General
