9
Installation
Installation
MA252 Side View
18"
45.7cm
MA252 Front View
6"
15.3cm
6"
15.3cm
2"
5.1cm
2"
5.1cm
BAL 15%
The MA252 Integrated Amplifier is designed to be
placed upright on a table or shelf, standing on its feet.
The required ventilation requirements are shown.
Always provide adequate ventilation for your MA252.
Cool operation ensures the longest possible operating
life for any electronic instrument. Do not install the
MA252 directly above a heat generating device, such
as a Power Amplifier. Allow at least 6 inches (15.3cm)
above the top, 5/8 inch (1.6cm) below the bottom and
2 inches (5.1cm) on each side of the Amplifier, so that
airflow is not obstructed. Allow 18 inches (45.7cm) of
depth for airflow and cable connections.
To Next Page
Loading...
