Need help?Do you have a question about the McIntosh MA8900 and is the answer not in the manual?
General| Power Output per Channel (8 Ohms) | 200 Watts |
|---|---|
| Power Output per Channel (4 Ohms) | 200 Watts |
| Number of Channels | 2 |
| Total Harmonic Distortion | 0.005% |
| Input Impedance | 20k ohms |
| Speaker Impedance Taps | 4, 8 Ohms |
| Rated Power Band | 20Hz to 20kHz |
| Headphone Output | Yes |
| Home Theater PassThru | Yes |
| Tone Controls | Bass and Treble |
| Tone Bypass | Yes |
| High Drive Headphone Amplifier | Yes |
| Digital USB Input | 1 |
| Digital Coaxial Input | 2 |
| Digital Optical Input | 2 |
| Digital MCT (DIN) Input | 1 |
| Power Output per Channel | 200 Watts |
| Frequency Response | +0, -0.5dB from 20Hz to 20, 000Hz |
| Dimensions (W x H x D) | 17.5 x 9.5 x 22 inches |
| Weight | 75 lbs (34 kg) |
| Dynamic Headroom | 2.0dB |
| Damping Factor | >40 |
| Preamplifier Inputs | 1 Balanced, 6 Unbalanced |
| Variable Outputs | 1 unbalanced, 1 balanced |
| Power Requirement | 120V 50/60Hz |
| Digital Input Sample Rate | 192kHz |
| Standby Power Requirement | <0.5 Watts |
| Digital Input Bit Depth | Up to 32-bit |
Pin configuration for balanced input connectors.
Details on power control, trigger output, and meter illumination connectors.
Information on data ports for remote control and IR IN port for external sensors.
Specs for RS232 cable, output terminals, and plug-in jumper connectors.
Detailed explanation of each button on the HR085 remote control.
Guidance on operating the MA8900 using the HR085 remote control.
Guide to accessing and navigating the MA8900 setup menu.
Customize input names, switch inputs on/off, and configure output behavior.
Configure triggers, data ports, passthru, baud rate, and remote control codes.
Manage IR sensor, power mode, and perform factory or microprocessor resets.
Basic operation for powering on/off, selecting sources, and adjusting volume.
Adjusting balance, trim levels, equalizer modes, and phono settings.
Configure mono/stereo modes, meter backlight, and display brightness.
Headphone usage, mute, recording, external amps, passthru, and digital inputs.
Installing drivers and connecting the MA8900 to a computer via USB.
Detailed technical specifications for the amplifier section.
Specs for digital audio inputs, dimensions, weight, and power requirements.
To Next Page
