McIntosh MA6600 - Specifications

TM2-15
Specifications
Sensitivity
-85dBm
Signal To Noise Ratio
85dB
Frequency Response
± 1dB from 20 to 20,000Hz
Harmonic Distortion
0.1%
Stereo Separation
80dB
FM Analog Specifications
AM Analog Specifications
General Specifications
FM HD Specifications
AM HD Specifications
FM Tuning Range
87.5MHz - 107.9MHz
FM Channel Spacing
200kHz
FM Antenna Input
75 ohms, Type “F” Coax connector
AM Tuning Range
530kHz - 1710kHz
AM Channel Spacing
10kHz
AM Antenna Input
Balanced, RJ45 connector
(for use only with supplied McIntosh RAA2 Remote AM
Antenna)
RAA2 Connection Cable
20 foot (6.09m) 8 conductor straight-thru cable with an outer
shield and RJ45 connectors on each end (shielded CAT5 or
CAT6 patch cable)
RAA2 Remote AM Antenna Overall Dimensions
Width is 6 inches (15.24cm)
Height is 2-1/2 inches (6.35cm)
Depth is 1-1/2 inches (3.81cm)
TM2 and RAA2 Weight
1 pounds (0.4 kg) net, 2 pounds (0.8 kg) in shipping carton
Shipping Carton Dimensions
Width is 12-1/4 inches (31.12cm)
Depth is 9-1/4 inches (23.5cm)
Height is 5 inches (12.7cm)
Useable Sensitivity
1.6uV (15.2dBf)
50dB Quieting Sensitivity
1.8uV (16.2dBf)
Signal To Noise Ratio
Mono: 75dB
Stereo: 72dB
Frequency Response
± 1dB from 20 to 13,000Hz
Harmonic Distortion
Mono: 0.1%
Stereo: 0.4%
Channel Selectivity
65dB Adjacent Channel
74dB Alternate Channel
Stereo Separation
35dB
Signal To Noise Ratio
85dB
Frequency Response
20 to 15,000Hz
Harmonic Distortion
0.1%
Stereo Separation
75dB
Sensitivity
550uV/m
Signal To Noise Ratio
45dB
Frequency Response
+ 0, - 6dB from 100 to 3,500Hz
Harmonic Distortion
0.25%, 80% Modulation
Selectivity
50dB Adjacent Channel