Need help?Do you have a question about the McIntosh MC1.25KW and is the answer not in the manual?
General| Total Harmonic Distortion | 0.005% |
|---|---|
| Signal to Noise Ratio | 124dB |
| Remote Power Control | Yes |
| Rated Power Band | 20 Hz to 20 kHz |
| Frequency Response | 20Hz - 20kHz (+0, -0.25dB) |
| Input Impedance | 10 k ohms |
| Inputs | XLR, RCA |
| Output Type | Speaker binding posts |
| Damping Factor | Greater than 40 |
Step-by-step guide for attaching speaker cables to output terminals.
Instructions for connecting spade lugs or bare wire to terminals.
Guide for connecting multiple amplifiers for bi-amping.
Specifics on spade lug and banana plug connections for bi-amping.
To Next Page
