Need help?Do you have a question about the McIntosh MC611 and is the answer not in the manual?
General| Number of Channels | 1 |
|---|---|
| Total Harmonic Distortion | 0.005% |
| Rated Power Band | 20Hz to 20kHz |
| Frequency Response +0,-0.25dB | 20Hz to 20kHz |
| Remote Power Control | Yes |
| Multi-Channel DB25 Cable | No |
| S/N below rated output | 120dB |
| Damping Factor | >40 |
| Frequency Response +0,-3dB | 10Hz to 100kHz |
| Power Output per Channel | 600 Watts @ 2, 4 or 8 Ohms |
Highlights features like Power Output, Quad Balanced Circuitry, Autoformer, Power Guard, and protection circuits.
Covers unit placement, ventilation requirements, and minimum spacing for optimal operation.
Detailed instructions on connecting speaker cables to the output terminals, including securing the connection.
Step-by-step guide for connecting speaker cables using banana plugs to the output terminals.
Instructions for connecting speaker cables using spade lugs or bare wire to the output terminals.
Crucial advice on observing correct polarity and matching impedance for speaker connections.
Guidance on selecting the correct terminal for impedance matching, especially for intermediate impedances.
Guides on powering the unit on manually or automatically through system control.
Explains key technologies like ThermalTrak™ transistors, Quad Balanced circuitry, and output Autoformers.
Details the protection circuits that ensure amplifier safety and prevent speaker damage from clipping.
Provides detailed specifications for power output, distortion, dynamic headroom, and frequency response.
To Next Page
