36
Music
Press the Front Panel MUSIC Push-button to activate
an On-Screen Menu allowing the selection of the
desired Sound Processing Mode from a list. Refer to
figure 25.
Game
Pressing the Front Panel GAME Push-button will
activate an On-Screen Menu allowing the selection of
the desired Sound Processing Mode from the menu
list. Refer to figure 26.
Zone Select
With Zone 2 and/or Zone 3 On, the MX122 Front
Panel Input Control, Volume Control and Information
Display can be used temporarily to control the
selected Zone.
Zone 2
Press the Z2 ON/OFF Push-button to switch Zone 2
On or Off.
How to Operate the MX122, con't
Setup
Pressing the SETUP Push-button activates the MX122
SETUP Mode for making changes to the System
settings. Once in the Setup Mode, press the SETUP
Push-button to exit Setup Mode. Refer to the set
of MX122 Menu separate folded sheets "MX122-
Menu-1 thru Menu-9". These separate sheets are con-
tained in the Owner’s Manual Packet.
Return
When the MX122 is in Setup Mode it is used for re-
turning to a previous Menu Screen.
Enter
When the MX122 is in the Setup Mode, press the EN-
TER Push-button on the Front Panel or on the Remote
Control to select the highlighted option.
Navigate
Use the Directions Push-buttons (Left) and
(Right) ▼ (Down) and ▲ (Up) on the Front Panel or
Remote Control to move Left, Right, Down or Up
through Menu Options.
Status
Repeated presses of the Front Panel or Remote Control
STATUS Push-button will step through the type of
incoming Audio Signal, the selected Input (along with
type of A/V Connection) and audio processing mode.
Movie
Pressing the Front Panel MOVIE Push-button will
activate an On-Screen Menu allowing the selection of
the desired Sound Processing Mode from a list. Refer
to figure 24.
Figure 20
Figure 24
Figure 25
Figure 26
To Next Page
Loading...
