Need help?Do you have a question about the McIntosh RS100 and is the answer not in the manual?
Audio Specifications| aux input sensitivity | 200 mV |
|---|---|
| aux input impedance | 10, 000 ohms |
| subwoofer output filter | 2, 000 Hz Low Pass |
| subwoofer output impedance | 200 ohms |
| frequency response | 55 Hz - 20 kHz |
| crossover frequency | 2, 000 Hz |
Power| power requirements | 100-240 Volts, 50/60Hz at 60 Watts |
|---|---|
| standby power consumption | Less than 0.5 watt |
Weight and Dimensions| overall width | 8.2 inches (20.8 cm) |
|---|---|
| overall height | 13 inches (33.1 cm) |
| overall depth | 10 inches (25.4 cm) |
| weight | 14.5 pounds (6.6 kg) |
Comprehensive list of safety instructions for operating the equipment, covering electrical shock, heat, and general usage.
Information on network requirements, Wi-Fi, and external component compatibility for the RS100 system.
Appreciation for purchase, recording serial number, and contact information for technical support.
Unpacking, connections, and installing the Play-Fi app for Apple devices.
Connecting to Wi-Fi, pairing, and configuring stereo pair for Apple devices.
Installing the Play-Fi app and initial setup for Android devices.
Connecting to Wi-Fi, pairing, and configuring stereo pair for Android devices.
Overview of McIntosh standards, features like Play-Fi, streaming radio, and inputs.
Physical dimensions, installation clearances, and rear panel connections.
Explanation of controls, indicators, and procedures for power, source, volume, and mute.
Instructions for meter illumination, Play-Fi usage, and microprocessor reset.
Detailed technical specifications and guidance for packing the equipment for shipment.
Details on the three-year warranty period, coverage, limitations, and exclusions.
Details owner costs, parts not covered, and how to obtain warranty service.
To Next Page