5
11th - SELECT
“Your
Network”
12th - Enter your
Network
Password
if required
13th - SELECT
“Set-up”
Play-Fi
Connecting
to Your Router
14th - SELECT the
name of the
room where
the RS100 is
located
16th - SELECT
“Music” to
start playback
of the desired
music
RS100 Quick Start for Apple Powered Devices, con’t
STEP 7, con’t
15th - SELECT “Location Name”
NOTE: The “WI-FI/NET” LED
indicator will change
from slowly pulsing On/
Off to On all the time.
STEP 8
ESTABLISH COMMUNICATIONS WITH THE MOBILE DEVICE, SETTING UP THE
PLAY-FI APP FOR A STEREO PAIR
17th - SELECT
“Play-Fi
APP”
While a single RS100 may be
used in a room for a Monaural
Sound Stage, most RS100s will be
used in pairs to produce a Stereo
Sound Stage.
When RS100s are going to be
used as a Stereo Pair in a room,
some additional setup procedures
are required.
After Step 7 (number 3 thru 16)
has been completed and music
is streaming from your mobile
device to the single RS100, then
perform the following additional
steps:
1. Stop the stream of music and
return to the Mobile Device
Main Icon Screen.
2. Then switch Power Off to the
working RS100.
3. Switch Power On to the sec-
ond RS100 and perform Step
6 (number 3 thru 16) for this
RS100.
4. After music is playing from
the second RS100, stop mu-
sic playback and return to
the Mobile Device Main Icon
Screen, refer to number 16.
5. Switch power back On to the
¿UVW56VZLWFKHG2IILQ
step 1).
6. Perform Step 8 (number 17
thru 28) to setup the pair of
RS100s as Left and Right
Channels.
18th - Display of
the RS100
pair loca-
ted in the
same room
19th - Select the
“Play-Fi
Settings
Menu”
20th - Select
“Stereo
Pair”
21st - Select
“Create
a Stereo
Pair”
22nd - Press the Icons (one at a
time) to identify which
Loudspeaker is playing the
Left Channel Sound
23rd - Select the
“Left Channel
Loudspeaker”
Continue
to STEP 8,
Number 24
on the next
page
To Next Page
Loading...