McQuay MAC 120 CR

5. SOFTWARE DESCRIPTION
5.1 Introduction
The Chiller Panel Controller can be used to control/display the status of Chiller.
Status viewing:
x ON/OFF status
x Mode (Cooling/Heating/Boiling)
x Mode set temperature
x Compressor status (ON/OFF/DEFROST)
x Water in, Water out, Outdoor air and Panel temperature
x Chiller Model (Chiller, Heat Pump, Chiller/Boiler, Chiller+Boiler, Heat Pump/Boiler, Heat Pump+Boiler)
x Advance Parameter settings
x Defrost sensor temperatures
x Compressor Discharge sensor temperatures
x Compressor run times
x Incoming alarm/fault/error
Status settings:
x ON/OFF switching
x Mode setting (Cooling/Heating/Boiling)
x Mode set temperature
x Manual entering defrost
x Advance Parameter settings
x Password changing
x Panel Option setting (Backlight, Alarm Buzzer, Screen saver, Contrast, Brightness, temperature unit)
x Time and Date settings
x 7 day programmable settings
x Clearing compressor run time
8