10
Appendix A (continued)
1.6. Entering Authorization Codes to Log In and Out of a Magnum
The Magnum will tell you if it accepted your code and the level of authorization.
For example,
if you entered a valid factory authorization code you will see the following:
If you entered an invalid authorization code you will see the following:
Once you are logged in you can log out immediately by simply entering any invalid
authorization code. If you are logged in and no keys are pressed for more than 15
minutes the Magnum will automatically log you out, warning you shortly before with how
many seconds remaining as shown here:
09:56 Password
Level – VIEW ONLY
Invalid
Pin
Then Press ‘ ‘ Key
F1 F2 F3
Press Any Key
to Avoid
Auth Log Out
60
09:56 Password
Level – Factory
Then Press ‘ ‘ Key
F1 F2 F3
To Next Page
Loading...
Need help?
General
