14
Appendix C (continued)
1.2. Determining and Changing the Network Address of a Magnum
Now press the Enter key. You should see something similar to the following:
Use the up and down arrow keys to select the Address number:
Finally, press the Enter key to make the change. In our example the RS-485 network address
has been changed from 1 to 2:
09:56 RS-485 Setup
Protocol MCS
Address 1 .
Baud Rate 19200
Back,
Address
1
09:56 RS-485 Setup
Protocol MCS
Address 1 .
Baud R 00
Back,
Address
2
09:56 RS-485 Setup
Protocol MCS
Address 2 .
Baud Rate 19200
Back,
Changes Made
To Next Page
Loading...
Need help?
General
