31
27-SETTINGS MENU
Technical Dept. - All rights reserved - Reproduction prohibited
SETTINGS
• FEED SCREW ON
• RECIPES
• SUMMER/WINTER
• PELLET SENSOR
• BRAZIER CLEANING
FEED SCREW ON
This function, which can only be activated with the stove o, enables you to load pellets
into the loading system (feed screw), and is used every time pellets in the hopper run
out.
It is useful to prevent failed start-ups (alarm A01) due to the hopper being empty.
RECIPES
To enable this function, enter the SETTINGS menu
and select RECIPE. The POP-UP appears prompting
the password, enter 1234. You may now edit the
two functions: AIR RECIPE and PELLET RECIPE.
To Next Page
Loading...
