To Next Page
S
Sabrina WrightJul 29, 2025
What to do if the red light is on but there is no video image on my MDC Caravan monitor?
- CChristopher WilliamsJul 29, 2025
If the red light on your MDC Caravan monitor is illuminated, but you're not seeing any video, here's what you should do: 1. Make sure the camera's power cord is securely connected. 2. Verify that the monitor is correctly paired with the camera: * Turn on both the monitor and the camera. * Press and hold the (M) key for 3 seconds to activate pairing mode. The display will show 'pairing', and the pairing process should complete automatically. * Once successfully paired, the monitor should display live footage from the camera.
General
